<b>OMRON SWITCH</b>
>NAME
>VALUE
1
2
3
4
<h3>Plated Through Hole - 2x5 No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_05x2</li>
</ul></p>
>NAME
>VALUE
LED1206 FAB style (smaller pads to allow trace between)
>NAME
>VALUE
>NAME
>VALUE
<b>Fusion 360 Electronics Design Rules</b>
<p>
Die Standard-Design-Rules sind so gewählt, dass sie für
die meisten Anwendungen passen. Sollte ihre Platine
besondere Anforderungen haben, treffen Sie die erforderlichen
Einstellungen hier und speichern die Design Rules unter
einem neuen Namen ab.
<b>Fusion 360 Electronics Design Rules</b>
<p>
The default Design Rules have been set to cover
a wide range of applications. Your particular design
may have different requirements, so please make the
necessary adjustments and save your customized
design rules under a new name.
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 9.7.0 new layer stackup definition has been added,
which will not be loaded with this version.
Since Version 9.7.0 new active CAMJOB file name has been added,
which will not be loaded with this version.
Since Version 9.7.0 board construction lines has been added,
which will not be loaded with this version.
Since Version 9.7.0 new design rule definitions have been added,
which will not be loaded with this version.